How to Inspect Used LGA1700 / AM5 Motherboard Sockets for Bent Pins (Inspection & Fixes)

Advertisement
With AMD's transition to Land Grid Array (LGA) on AM5 (1,718 pins) and Intel's high-density LGA1700 socket (1,700 pins), pins no longer reside on the underside of processors—they are spring-loaded cantilever fingers soldered directly into the motherboard socket. A single slip of a screwdriver, an accidental finger brush, or dropping a CPU at an angle can bend or snap these microscopic gold fingers.
Because bent pin damage is universally classified as "Customer Induced Damage" (CID) and voided by manufacturer warranties (ASUS, MSI, Gigabyte, ASRock), unvetted used marketplaces are rife with sellers attempting to offload damaged boards as "untested". Here is how to inspect and verify an LGA socket before handing over payment.
1. Macro Inspection Technique: The Raking Light Method
Never attempt to inspect an LGA socket under flat overhead ambient room lighting. The gold pins are oriented in opposing quadrant angles, designed to reflect light uniformly across the grid:
Hold your smartphone flashlight 2 inches above the board at a shallow 20-degree angle. Slowly rotate the light 360 degrees around the socket perimeter. In a healthy socket, the gold pin tips will sparkle in uniform, unbroken geometric waves. Any bent pin will break the reflection, standing out as a glaring dark void or an abnormally bright flared reflection.
Switch your phone camera to its 3x or 5x telephoto/macro lens. Take a high-resolution 48MP/50MP photo directly perpendicular to the socket, pinch-zoom into each of the four quadrants, and inspect the spring tips.
2. Can Bent Pins Be Repaired?
If you inadvertently receive a board with 1 or 2 bent pins, repair is sometimes possible using a 0.5mm mechanical pencil (without lead) or an acupuncture needle under a magnifying lamp. The hollow tip of the mechanical pencil can be slipped over the bent pin to gently bend it back into alignment.
However, LGA socket pins are made of phosphor bronze with gold flash plating. Bending a pin more than twice causes metal fatigue and will snap the head off entirely.
Guaranteed Socket Integrity on Koukan
Every motherboard sold through Koukan requires photo verification of the socket under the plastic protective cap, with buyer protection covering you against bent pin transit damage.
Advertisement